The update file contains the latest FRITZ!OS (Firmware) for the FRITZ!Box 6850 LTE. **Attention:** This update file is only intended for use with FRITZ!Box 6850 LTE! Please follow the instructions at the end of this file to install the update. ``` Product: FRITZ!Box 6850 LTE Version: FRITZ!OS 7.58 Language: German, English, French, Italian, Dutch, Polish, Spanish Release date: 19/03/2024 ``` **New features:** ------------------------------------------------------------ - FRITZ!OS 7.56 - with over 150 new functions and useful improvements - Phone calls made easier with FRITZ!Box 6850: call directly via your SIM card's mobile telephone number - New energy-saving mode can be switched on upon request - Simplified replacement of a FRITZ!Box with new wizard - Mesh Wi-Fi now with dynamic smart repeating for better performance in the home network - VPN with WireGuard technology: Simple, fast, and secure connection to the home network from anywhere - More convenient telephony: New FRITZ!Fon "Voice" ringtone and block for unknown callers - Many interesting new Smart Home options: Scenes, routines, and lighting sequences - The user interface was fine-tuned and rounded out with comprehensive "Help and Info" - Many new functions for the MyFRITZ!App and FRITZ!App Smart Home (iOS/Android) ------------------------------------------------------------ With each FRITZ!OS update, AVM also updates its security functions. Therefore we recommend performing the update for all devices. ------------------------------------------------------------ Note: Instructions for configuring and using Mesh functions are presented at en.avm.de/mesh-faq Below you find a complete list and descriptions of the new functions in the latest FRITZ!OS, along with a list of further improvements in this version. --- # New Features in FRITZ!OS 7.56 ## Mobile Communication: - **NEW** Support for Cell Broadcast Messages ## Internet: - **NEW** Automatic prioritization provides for fairly distributed data rates throughout the entire FRITZ!Box network (home network and guest network) - **NEW** VPN with WireGuard for simple setup of fast, secure VPN connections (for more, see [3]> - **NEW** The MyFRITZ! direct connection allows you to receive information on the FRITZ!Box in real time on MyFRITZ!Net ## Telephony: - **NEW** Support for telephony with the SIM card's mobile telephone number via UMTS/3G (CSVoice) and LTE/4G (VoLTE) (6850 only) [1] - **NEW** Call handling allows call blocks and call diversion (e.g. to answering machine) for callers "not in the telephone book" (telephone book as positive list) - **NEW** On a SIP DDI line for corporate customers, call diversion settings can be configured so that the caller number is displayed at the destination (partial rerouting) ## DECT/FRITZ!Fon: - **NEW** The new, optional "Voice" ringtone announces the name in the telephone book that matches the caller number, or the location and the telephone number. For an alarm or appointment, the ringtone announces the reason for the reminder - **NEW** The new FRITZ!Fon convenience function "Appointment Calendar" rings to remind about appointments ## Smart Home: - **NEW** Configure and apply scenes to generate the mood for any occasion - **NEW** Create and enable or disable routines (if-then combinations) for automatic interactions in the Smart Home - **NEW** Templates for the comfort functions switch Wi-Fi access, switch Wi-Fi guest access, start telephone call, switch answering machine, send email (push service), and open web service (URL) - **NEW** Selection of an additional display of the temperature and humidity profile on the FRITZ!DECT 440 - **NEW** Natural lighting sequences for device groups and templates with FRITZ!DECT 500 - **NEW** Support for compatible external window sensors for the radiator controls' open window detection ## Mesh: - **NEW** In "Mesh Repeater" operating mode, connections to the Mesh Repeater with multiple Wi-Fi bands are now possible ## USB: - **NEW** Support for storage media formatted in exFAT ## System: - **NEW** In the new energy-saving mode, Wi-Fi, LAN and USB use even less power for slightly reduced performance - **NEW** New wizard transfers all important Internet, telephony, and WLAN settings as well as connections to mesh, telephony, and smart home devices to a new FRITZ!Box - **NEW** "Help and Info" in the user interface: A completely overhauled help function with many instructions based on user scenarios and a strong search engine ## FRITZ!Apps: - **NEW** MyFRITZ!App offers the option to enable prioritization for internet access on each home network device - **NEW** MyFRITZ!App allows home network devices to be renamed - **NEW** MyFRITZ!App allows a MyFRITZ! account to be created for MyFRITZ! internet access to the user interface of the FRITZ!Box (for iOS) - **NEW** FRITZ!App Smart Home supports scenes and the enabling and disabling of routines ------------------------------------------------------------ # Further Improvements of FRITZ!OS 7.58 ## Telephony: - **Fixed** Calls via VoLTE to recipients with immediate call acceptance failed ------------------------------------------------------------ # Further Improvements of FRITZ!OS 7.57 ## System: - **Fixed** stability and security increased ------------------------------------------------------------ # Further improvements in FRITZ!OS 07.56 ## Mobile Communications: - **Improved** Mobile network overview with a new design and more detailed information on the mobile network connection (LTE information / overview) - **Improved** New modem firmware with various optimizations and improved stability - **Improved** ZeroTouch startup when using SIM cards with deactivated PIN query including automatic country and provider detection - **Improved** Option to set the preferred mobile network type during initial connection - **Improved** More detailed error messages in cases of problems establishing the Internet connection or disruptions during the connection - **Improved** Accompanying event messages during a mobile modem software update - **Improved** Automatic initial setup of "Vodafone Zuhause" with Super PIN (Germany) - **Improved** Mobile connection authentication via CHAP supported (Other provider allows setting PAP or CHAP) ## Internet: - **Improved** When the DNS server of the internet provider (or the listed DNS server) is interrupted, automatic switch to the public DNS server - **Improved** FRITZ!Box services (SMT, FTP, IGD and TR-064) offered via Bonjour or mDNS - **Improved** Unwanted queries from certain IP addresses to FRITZ!Box services can be blocked with the new IP block list - **Improved** "QUICK" added to the internet protocols supported by parental controls - **Improved** When internet access to storage media via FTP/FTPS is enabled, the randomly preselected port number is displayed - **Improved** Support for VPN user dial-in for Android mobile telephones and tablets with IKEv2 IPSec (preshared key) - **Improved** Optimized upload and download speeds by adjusting the TCP segment size (MSS clamping), now also for IPv6-based connections - **Improved** IPv4 VPN connections (IPSec) can be tunneled via IPv6, for instance to reach FRITZ!Box devices on DS Lite connections (IP6 tunnel for IPv4, IPv4-inIPv6) - **Improved** VPN packet acceleration supported in IPSec - **Improved** In the user interface, an image now illustrates the different types of VPN connections - **Improved** No publication of IPv4 address to MyFRITZ!Net on dual-stack connections with carrier-grade NAT; MyFRITZ! address always resolved here into the IPv6 address - **Improved** After a restart, the FRITZ!Box refreshes its IP address with MyFRITZ!Net immediately (DynDNS update) - **Improved** A FRITZ!Box in "Mesh Repeater" mode is automatically registered with the MyFRITZ! account of the Mesh Master - **Improved** Support for IPv6 during prioritization of network applications and prioritization of a home network device - **Improved** Display of data loading from the guest network on IPv6 in the "Online Monitor" - **Improved** The IPv6 Interface Identifier used on the WAN port is chosen at random - **Improved** Improved tips and error messages on sharing ports on DSL Lite connections with PCP support - **Improved** Data traffic from Wi-Fi calling (VoWifi) with smartphones prioritized over the FRITZ!Box internet connection - **Improved** NTP interoperability improved through better estimation of the hardware clock's deviation - **Change** Predefined selection of DynDNS providers replaced by a general settings option - **Change** The "IPv6" tab is displayed for IPv6-only connections - **Change** Support for the User Service Platform specification (USP, Broadband Forum TR-369) and configuration on the "Provider Services" tab - **Change** When a new port sharing setting is created, the outdated "eMule" application is no longer listed - **Change** "Eplus" removed from the provider list for internet access (Germany) - **Fixed** The ICMP identifier for pings was set to 0 by the FRITZ!Box in some rare cases - **Fixed** The FRITZ!Box could send an invalid Phase1 ID for VPN user dial-in via IPSec - **Fixed** The entry field for the IPv6 LAN prefix was too small - **Fixed** The IPv6 address could not be entered manually for IPv6 port sharing - **Fixed** Devices in the guest network with a captive portal were not connected to the internet via IPv6 - **Fixed** IPv6: When SLAAC was used and the DHCPv6 server was disabled in the FRITZ!Box, after a restart IPv6 could not longer be used in the home network - **Fixed** In individual cases, deletion of a port sharing setting deleted additional port sharing settings of the same device - **Fixed** VPN connections (IPSec) to StrongSWAN via IPv6 failed under some circumstance - **Fixed** VPN connections (LAN-LAN) could not be saved without a name - **Fixed** In some scenarios the FRITZ!Box's NTP server did not work after re-establishing the internet connection - **Fixed** Under certain circumstances, not all DNS servers made available by the provider were used ## Wi-Fi: - **Improved** When a radar event is detected, the system attempts to hold the channel with reduced bandwidth - **Improved** When encryption on the Mesh Master is changed to "non-encrypted", activation of the 5-GHz Wi-Fi network is ensured and wireless devices are correctly deregistered if necessary - **Improved** Data rates increased when exchanging data with certain wireless devices - **Improved** The legend below the "Allocation of Wi-Fi Channels" diagram on the "Wi-Fi / Wi-Fi Channels" page is now displayed in a single line - **Improved** Optimized automatic channel selection when checking for prioritized use in the 5-GHz Wi-Fi network - **Improved** The adjustment of radio channel settings in the 5-GHz frequency band now allows all channel numbers to be selected - **Change** New message under "System / Event Log" when a new session key was negotiated (encrypted connections compliant with the WPA3/SAE standard) - **Change** Restructuring of the "Wi-Fi / Wi-Fi Network", "Wi-Fi / Security", and "Wi-Fi / Wi-Fi Channel" pages - **Change** MAC address filters are limited to a maximum of 128 entries - **Fixed** On the user interface for the "Wi-Fi Guest Access", starting the WPS quick connection was linked with the "Wi-Fi / Security / WPS" page - **Fixed** Incorrect information when Wi-Fi disabled when "Internet connection via Wi-Fi" is selected - **Fixed** The period for displaying the load on the Wi-Fi channel could not be changed in the user interface when the 2.4-GHz Wi-Fi network was disabled - **Fixed** Sorting of "Other Wi-Fi Networks in Your Vicinity" table by name did not always work reliably ("Wi-Fi / Wi-Fi Channel" page) - **Fixed** Preset name for Wi-Fi guest access linked to the language selection - **Fixed** When a WPS quick connection was started during the check for higher-priority users (e.g. radar), an incorrect message could be displayed under "System / Events" ## Mesh: - **Improved** Higher data throughputs in the Mesh Wi-Fi possible thanks to dynamic smart repeating - **Improved** Display of home network connections on the "Mesh" page of the user interface responds more quickly to changes - **Improved** Home network devices (e.g. printers or NAS) displayed in the "Mesh Overview" can be opened directly by link - **Improved** Changed country and language settings of the Mesh Master are automatically transmitted to the Mesh Repeater - **Improved** New message in "System / Event Log" when FRITZ!OS removes a network loop - **Improved** "Mesh Overview" now shows network switches that use the LLDP protocol - **Improved** "Mesh Overview" now shows deployed network switches or access points in sequence - **Improved** Indication on the start page of the user interface when there are FRITZ! devices in the home network that are not yet enabled for Mesh - **Improved** Region and language settings of the FRITZ!Box are adopted by FRITZ!Repeater(s) ## Telephony: - **Improved** Robuster handling of inconsistent data in Apple telephone contacts - **Improved** Support for using up to 10 individual telephone numbers (MSNs) with the "Telekom CompanyFlex" rate (Germany) - **Improved** Online contacts from web.de, gmx.de, and 1&1 converted to CardDAV - **Improved** Revised display of table of configured call diversions - **Improved** Encrypted telephony more robust against lost connections - **Improved** Optimization for integration of a telephone book into Mesh - **Improved** Designation of a caller's telephone number in the call list, even when a telephone number specified by the caller was also transmitted - **Improved** Optimization of automatic configuration of telephone numbers by the internet provider - **Improved** Reworked texts for push services on fax function and answering machines on fax function and answering machine - **Improved** Support for more call scenarios with voice data transmission before call acceptance (P-Early-Media) - **Improved** Wizard for telephony devices enables configuration of internal fax function without enabling fax reception - **Improved** Display of certain table columns in the "Telephone Numbers" can be switched on or off - **Improved** CAPI over TCP can be disabled if desired via "Diagnostics / Security" - **Improved** Prioritization of telephony data adjusted to comply with the Deutsche Telekom specification 1TR112 V14 - **Improved** FRITZ!Box takes note of the last 20 destination telephone numbers for call diversion and offers these when new call diversion settings are configured - **Improved** For messages on the answering machine, the name that matches the caller's number in the telephone book, or the location and telephone number, can be announced while listening to messages - **Improved** Call diversion settings and call blocks for incoming calls can be restricted to a single telephone number in the home network - **Improved** Supports groups for online contacts from Apple - **Improved** Support for photos for online contacts from Apple, Telekom, and CardDAV providers - **Change** Outdated entries removed from the list of telephone providers - **Fixed** If the internal fax machine was used with the "only send" setting, incoming calls were not logged in the call list - **Fixed** Newly created telephone numbers could not always be edited retroactively - **Fixed** Root number was not displayed when the settings of the SIP DDI line were edited - **Fixed** Umlauts in the names of telephony devices were sometimes converted into special characters - **Fixed** Under certain rare conditions, the initiator of a three-party conference was not able to hear the two other parties ## DECT/FRITZ!Fon: - **Improved** Support for DECT headsets from the Sennheiser EPOS series for outgoing calls and picking up calls via the headset button - **Improved** Higher resolution of images from Google online contacts - **Improved** Convenient control of DECT headsets that are GAP or CAT-iq 2.x-compliant - **Improved** Quick dial for number keys 2 to 9 can be set up directly on the FRITZ!Fon by pressing and holding the numbers - **Improved** More convenient use of DECT handsets - **Improved** Three new ringtones with bird sounds available for FRITZ!Fon ("Whistling", "In the Woods" and "Yardbirds") (configured under "MENU / Settings / Audio / Ringtone / Own ringtone") - **Change** Missed calls older than 28 days are no longer signaled by a message key blinking red on the FRITZ!Fon ## Home Network: - **Improved** Reworked details pages for network devices - **Improved** FRITZ!Powerline devices can be restarted in the "Device Details" of the FRITZ!Box user interface under "Home Network / Network" or registered by clicking a button - **Improved** Own network device highlighted in the overviews of the user interface - **Improved** More flexibility when assigning your own names for a network device in the home network for display in the user interface: Spaces and special characters are allowed - **Improved** The icon in the user interface for prioritized network devices was updated - **Improved** Reworked user guidance through changing of the FRITZ!Box name ## Smart Home: - **Improved** Template for radiator controls expanded with addition of comfort temperature and cool-down temperature as well as antifreeze and boost functions - **Improved** Sunrise/sunset schedule with more settings options independent of sunrise and sunset - **Improved** The "Adaptive heating start" function can be disabled for radiator controls - **Change** "Smart Home" menu subdivided into "Devices & Groups", "Automation" and "Operation" ## USB: - **Improved** Media data are read in completely with "Refresh index" - **Improved** A list of FRITZ!Box users with the right to access NAS contents is displayed under "Home Network Sharing" - **Improved** A message appears indicating when the maximum number of sharing links is exceeded - **Improved** After completion of fax configuration, a USB folder for storing faxes can be selected under "Settings for the Fax Function" - **Change** When uploading files to fritz.nas, the creation date of the respective file is now displayed - **Change** MagentaCloud removed as a media source in the internet because API is no longer compatible - **Change** After indexing, the ".start_indexation.mp3" file is no longer displayed via SMT/FTP - **Fixed** Added radio stations were displayed only after manual indexing - **Fixed** After starting operation of "FRITZ!Box as Mesh Repeater", the network drive function (SMB) was not always available - **Fixed** Accessing a sharing link allowed the creation of additional sharing settings - **Fixed** During the slide show of FRITZ!NAS images, the control for the duration of the display was not displayed correctly - **Fixed** Folders in the uppermost level of the directory structure were not displayed in the selection dialog for moving files ## System: - **Improved** The INFO LED flashes during a running update of the mobile modem software - **Improved** New display of Wi-Fi connections between FRITZ! devices - **Improved** Summary of information areas on the "Overview" page for better orientation - **Improved** New design and improved operation concept for logging in to the FRITZ!Box user interface - **Improved** Revised layout of the FRITZ!Box user interface - **Improved** Changed operating concept for changing settings in the user interface - **Improved** Under "System / FRITZ!Box Users / Apps", the FRITZ!Box user from which each app has been configured is displayed for each app - **Improved** The "Forgot Password" push service email now contains information on the device that requested this mail - **Improved** If desired, the selection list of FRITZ!Box users can be hidden during login to the user interface from the home network - **Change** Simplified flashing behavior of the FRITZ!Box LEDs when connection is triggered by the "Connect" button - **Change** The hyperlinks for Contents, Manual, Tips & Tricks, en.avm.de, and Legal Notice are now located under "Help and Info" - **Change** New contents under "Help and Info / Get to Know the Functions" - **Change** Additional confirmation for configuring certain settings can no longer be switched off - **Change** The push service for the Wi-Fi guest access sends registration and deregistration events of the guest devices from the Mesh Repeater or Mesh Master with which the devices are registered - **Fixed** The display of several "Exposed Hosts" for two different devices under "Diagnostics / Security" was sometimes misleading ## Security: - **Improved** Use of a random SIP port possible under "Telephony / Telephone Numbers / Line Settings / Security" - **Improved** All a user's rights listed under "System / FRITZ!Box Users" - **Improved** Information about security methods currently used on SIP remote sites under "Diagnostics / Security / Telephony" - **Improved** Display of the last ACS connections under "Diagnostics / Security / Provider Services (TR069)" - **Improved** While login is blocked due to an incorrect password entry, the password entry field can be edited for the next login attempt - **Improved** SIP port can be reached from the internet only by the set protocol (IPv4 or IPv6) - **Improved** Protection from frequent login attempts with incorrect password via the SMB protocol ## FRITZ!Apps: - **Improved** FRITZ!Apps support with explanation of where the preset FRITZ!Box password is found on the FRITZ!Box - **Improved** MyFRITZ!App shows when internet access is blocked for each home network device - **Improved** MyFRITZ!App with additional connection information for the home network devices - **Improved** When MyFRITZ!App is registered with a FRITZ!Box that has not yet been configured, MyFRITZ!App indicates this and offers to open the browser for configuration - **Improved** MyFRITZ!App displays Wi-Fi dual-band connections for "Your Mesh" in the "Overview" diagram - **Improved** MyFRITZ!App reliably displays Mesh connection paths graphically, even for more complex constellations - **Improved** MyFRITZ!App indicates when Mesh functions have not been enabled in the Mesh Repeater - **Improved** MyFRITZ!App sets the name of the smartphone or tablet as the name of the network device in the home network of the FRITZ!Box if no name was assigned yet (for Android) - **Improved** MyFRITZ!App supports the convenience function of call diversion for callers "not in the telephone book" - **Improved** FRITZ!App WLAN displays the channel bandwidth of the Wi-Fi connection - **Improved** FRITZ!App Smart Home displays the adaptive heating (preheating phase) of radiator controls - **Improved** FRITZ!App Smart Home displays open window detection with a window sensor on the radiator control - **Improved** FRITZ!App Smart Home supports the creation of templates for the current light setting - **Improved** FRITZ!App Smart Home displays a message when applying templates ------------------------------------------------------------ [1] Phone calls made easier with FRITZ!Box 6850: call directly via your SIM card's mobile telephone number (VoLTE) FRITZ!Box 6850 5G and LTE get a practical feature with the update to FRITZ!OS 7.56: telephoning using the phone number on the SIM card. That's how it's done: With the new FRITZ!OS 7.56, the FRITZ!Box 6850 can make calls with a connected telephone via the SIM card. After the update to FRITZ!OS 7.56, you can use the mobile phone number on the SIM card for phone calls with a FRITZ!Fon. If you already have a mobile phone tariff with a high data volume and voice flat rate, you can use the data volume on the FRITZ!Box by booking a MultiSIM, which is usually available very cheaply, and also use the associated mobile phone number to make calls with a connected telephone. When using a MultiSIM, both the smartphone and the telephone on the FRITZ!Box ring at the same time for incoming calls. Alternatively, it is also possible to use a mobile phone tariff exclusively for the FRITZ!Box. This gives you your very own mobile phone number for your home. This new feature enables new convenience: You can make calls at home using a FRITZ!Fon while your smartphone is charging. Thanks to the DECT connection of the FRITZ!Fon, you have the best reception anywhere at home - even where mobile phone reception is weak. And in the home office on the FRITZ!Box, you can use the mobile phone number with much greater convenience than on a smartphone, since the complete range of functions of the telephone system integrated in the FRITZ!Box is now available for this. ### FRITZ!Box supports telephony in LTE and 5G networks The prerequisite for telephony via the SIM card is that the tariff supports Voice over LTE, which is now standard for tariffs for internet and data use. ### This is how it works: Set up telephony via the SIM card Call in a web browser the user interface of your FRITZ!Box "http://fritz.box" and once you've logged in click on the "Telephony / Telephone Numbers" menu item. From there, select the option "New Telephone Number" and then "Mobile telephone number". Now enter your mobile number (without country code) in the corresponding field and then click on "Apply". ... and you're ready to start making calls. ------------------------------------------------------------ ## [2] More Convenient Telephony: FRITZ!Fon Learns to Speak The FRITZ!Fon gets a new appointment calendar and learns to speak. With the new "Voice" ringtone, FRITZ!Fon can now inform you about callers you have stored in your contacts or calendar entries with announcements such as "Call from Claudia" or "Leave now for the train station". ### New "Voice" Ringtone The new "Voice" ringtone announces the name of the caller, if available, or the location the call is coming from along with the telephone number of the caller. It's available for incoming calls, but voice announcements can also be selected for alarms and appointments. When you get a call, instead of a ringtone the caller's name is announced if their telephone number is in your contacts. If there is no telephone book entry, the location from which the call is coming is announced, depending on the country, along with the telephone number of the caller. You'll need to have an active MyFRITZ! account. This feature can be enabled under "Telephony / Telephony Devices" in the user interface. Select the FRITZ!Fon handset you want to edit, assign one or more telephone numbers for incoming calls, and then switch to the "Ringtones" tab. Select there the "Voice" ring tone for the corresponding telephone number at the end of the list. You can configure additional settings under "Voice Ringtone". For alarms and the appointment calendar you can select the "Voice" ringtone directly on the FRITZ!Fon. ### Appointment Calendar With the new calendar, you can now set up appointments in FRITZ!Fon and create a reminder for them. You can also be reminded of the appointment with the new "Voice" ringtone. Note: The new features are available for FRITZ!Fon M2, C4, C5 and C6 with the latest handset firmware. ------------------------------------------------------------ ## [3] Scan the QR Code and You've Got a Connection: VPN with WireGuard Support for the WireGuard VPN protocol is also new, making it even easier to set up secure connections from the internet to the FRITZ!Box home network ? for example when working from home or if you want to access your home network while on the move. With the new WireGuard Assistant on the FRITZ!Box, encrypted connections can be set up on smartphones, notebooks or PCs in no time at all using the WireGuard app via QR code or software. The previous VPN protocol for FRITZ!Box, IPSec, has also been updated by the AVM development team and now supports both IPv4 and IPv6 connections. ### WireGuard Support for Simple Setup of VPN Connections WireGuard(R) is a modern, easy to understand, fast, and simple VPN solution. For most operating systems, there are apps or programs from WireGuard for connecting single devices to a network via WireGuard VPN. WireGuard is a registered trademark of Jason A. Donenfeld (https://www.wireguard.com). WireGuard is not compatible with other VPN protocols. Therefore it cannot connect to IPSec, OpenVPN and similar peers. WireGuard itself does not contain any mechanisms for key distribution. Both parties therefore require the public keys of the respective remote site. The concept for the FRITZ!Box is that both key pairs can be generated on the FRITZ!Box to set up a connection, and all the necessary dial-in data can be imported on the client side via a file or QR code, e.g. in the WireGuard App. For your FRITZ!Box to be accessible via WireGuard VPN, you need a MyFRITZ! address (you'll need to register your FRITZ!Box with MyFRITZ!Net) or a third-party DynDNS address for your FRITZ!Box. Please note that the connection configuration ? QR code or configuration file - is not permanently stored on the FRITZ!Box (for security reasons). Do not let the QR code or configuration file fall into the hands of unauthorized persons. ------------------------------------------------------------ ## [4] More Performance in Mesh Wi-Fi With dynamic Smart Repeating, FRITZ!OS 7.50 brings more performance to the Mesh Wi-Fi of the FRITZ! home network. Users who use a FRITZ!Repeater or a FRITZ!Box as a Mesh Repeater thus benefit from higher data throughputs and more stability for their Wi-Fi connections. With the new FRITZ!OS version, both frequency bands (2.4 and 5 GHz) are used even more dynamically for the optimal connection between the FRITZ!Box at the connection and the Mesh Repeater. ### Mesh Wi-Fi ? More Performance for FRITZ!Box as Mesh Repeater FRITZ!Box devices that support "Mesh Repeater" operating mode could previously be connected to other FRITZ!Boxes or also FRITZ!Repeaters only with one Wi-Fi band (2.4 or 5 GHz) at a time. With the new FRITZ!OS, it's now also possible to use more than one Wi-Fi band for the Wi-Fi uplink. This enables higher data throughputs and stability in the Mesh. When updating a Mesh network that's already been set up with an older FRITZ!OS, which consists of one or more FRITZ!Box devices in Mesh Repeater mode, the previously unused Wi-Fi band is connected automatically. ------------------------------------------------------------ ## [5] More Operating Convenience and a Clear FRITZ!Box Menu FRITZ!OS 7.50 also refreshes the design of the fritz.box user interface and makes it even easier to read. The restructured overview page helps users find their way around even better. If you want to find out more quickly about how to use the FRITZ! products within the menu, you can get tips and instructions directly from the new online help, including a keyword search. The FRITZ!Box user interface has been visually refreshed with the new version. Particularly noticeable here is the separation of the menu from the left edge of the screen and the width of the displayed pages have been trimmed for better readability. This has a positive effect on tables and texts, especially when displayed on particularly large screens (resolutions), and at the same time improves the display on smartphones and tablets. The redesign is based on a new style guide that facilitates the integration of innovative operating concepts. ------------------------------------------------------------ ## [6] If FRITZ!, Then Smart - New Options With Scenes and Routines With FRITZ!OS 7.50 the FRITZ! Smart Home becomes even more versatile. With scenes, a range of different actions can now be called up simultaneously in the Smart Home. The new routines ensure devices, scenarios and templates with an if-then link are automatically started. ### Scenes ? Create the Perfect Mood for Every Occasion With scenes you can simultaneously perform different actions in the Smart Home. For example, with the "Coming Home" scene, all radiator controls can be set to the comfort temperature at the touch of a button, and your LED lights and smart plugs, the Wi-Fi and/or guest Wi-Fi, and the answering machine can all be switched on at the same time. The preconfigured two scenes "Coming Home" and "Leaving Home" can be applied directly. They consist of automatically generated templates that can be subsequently turned on and off as required. With a scene you create yourself, multiple devices can be combined and controlled. Templates that have already been created can be added and deleted on an individual basis. Furthermore, individual templates can be created as a simple scene. Settings for devices and/or device groups can be saved and reused with templates. Scenes can be used via the FRITZ!Box, a FRITZ!Fon, FRITZ!App Smart Home or the FRITZ!DECT 440. ### Routines - for Customizable Automations in the Smart Home Routines enable devices, scenes and templates to be automatically controlled or enabled by an if-then link. The shortcut consists of a trigger and a condition that must be met for an action to be performed. In the Configuration Wizard, you can define a device as a trigger, then specify the change in state or an event (condition). Finally, a previously created scene or template (action) is selected, which is activated when the condition is met. For example, if the humidity measured by the FRITZ!DECT 440 reaches a certain level, the previously configured scene "Ventilation" with a FRITZ!DECT 200 smart plug with a connected humidifier is applied. ------------------------------------------------------------ ## [7] Additional Confirmation After this update, additional confirmation for certain settings and functions can no longer be disabled. However, if additional confirmation was disabled before the update, this condition remains intact after the update. AVM recommends always using additional confirmation for reasons of security. To allow changes to protected settings from on the go, the TOTP standard with one-time passwords can be also used for additional confirmation. A freely available password manager or a separate app like the Google Authenticator can be used for this. ------------------------------------------------------------ ## [8] New wizard transfers all important settings for the internet, telephony, and Wi-Fi network, and connections to Mesh, telephony and Smart Home devices to a new FRITZ!Box. Please take note of the following tips and requirements: The Wizard provided in this FRITZ!OS offers assistance if you are using a FRITZ!Box that you would like to replace with another new FRITZ!Box. Any other FRITZ! products connected with your currently used FRITZ!Box, including FRITZ!Repeaters, FRITZ!Fons, FRITZ!DECT Smart Home products, and FRITZ!Apps will also be connected to the new FRITZ!Box. This new switching function makes it easier to exchange your old FRITZ!Box with another FRITZ!Box, so that - the Wi-Fi and home network and all of the connected home network devices will work the same after the switch - no settings have to be changed on the devices connected with the FRITZ!Box because of the switch - the internet connection and telephony can continue to be used in the same way - all important settings on the currently used FRITZ!Box are transferred to the new FRITZ!Box (for instance, for telephony, Smart Home, and MyFRITZ!) 1. Two steps must be taken to prepare the other, new FRITZ!Box: - a current FRITZ!OS version 7.55 or newer. During the course of the wizard you will be prompted to update your new FRITZ!Box if necessary. - Set your new FRITZ!Box back to its factory settings , if it was used at all before, and then disconnect it from electrical power. 2. The currently used FRITZ!Box provides the internet connection on your line and has the latest FRITZ!OS version 7.55. 3. If you use any FRITZ!Repeaters: Update their FRITZ!OS. 4. If you use FRITZ!Fons or FRITZ!DECT Smart Home products, check whether a software update is available and, if so, install it. 5. If you use FRITZ!Apps for the previously used FRITZ!Box, have your smartphone ready. 6. You must have physical access to the FRITZ!Box you are currently using, so that you can insert its network cable and press the buttons. The other, new FRITZ!Box should be close at hand. You will also need to connect to electrical power and the internet for the switching procedure. 7. If you are not only changing the FRITZ!Box model, but also the type of connection (for instance, from DSL to fiber optic), then the other, new connection must be ready for operation. 8. You must be connected with the homei network of the currently used FRITZ!Box with a notebook or computer (recommended) or by smartphone. Under "Wizards" in the http://fritz.box user interface there is a "Transfer Your Settings to a New FRITZ!Box" link to click. Read the instructions presented there and follow them carefully. The process usually takes around 10 to 30 minutes, depending on the complexity of the home network. ------------------------------------------------------------ ------------------------------------------------------------ # New functions of FRITZ!OS 7.28 ## Mobile Communications: - **NEW** Send function for SMS and Journal for received and sent SMS (Internet/Internet access/SMS) ## Internet: - **NEW** Prioritization of a home network device can now be enabled on the FRITZ!Box user interface ## Telephony: - **NEW** Fax function: Log for received and sent faxes - **NEW** Support for the "Telekom CompanyFlex" business telephony platform (SIP trunk and cloud PBX) ## DECT/FRITZ!Fon: - **NEW** New start screen with current weather information ## Smarthome: - **NEW** FRITZ!DECT 440 measures humidity and allows its display with FRITZ!App Smart Home and FRITZ!Fon - **NEW** FRITZ!DECT 440 displays the QR code for simple connection with the Wi-Fi guest access - **NEW** Guest Access or answering machine can be switched on and off at the touch of a button on the FRITZ!DECT 440 - **NEW** Roller shutter control via FRITZ!DECT 440, FRITZ!Fon, and the FRITZ!Box user interface - **NEW** At the touch of a button on FRITZ!DECT 440 or 400, an internal phone rings and displays a message ------------------------------------------------------------ # Additional improvements in FRITZ!OS 7.29 ## Mobilfunk: - **Improved** New software for the mobile modem with improved stability of the mobile connection ## Internet: - **Improved** List of trusted certification authorities updated - **Improved** When internet access to storage media via FTP/FTPS is enabled, the randomly preselected port number is displayed ## Telephony: - **Improved** Encrypted telephony more robust against lost connections - **Improved** Enhanced interoperability for use of encrypted telephony - **Fixed** Restricted availability by telephone when using telephony via IPv6 ## USB: - **Improved** compatibility with MacOS 12.0 "Monterey" - **Improved** compatibility with several older devices (printers, scanners) ------------------------------------------------------------ # Further Improvements of FRITZ!OS 7.28 ## Mobile Communications: - **Improved** New software for the mobile modem with improved stability of the mobile connection - **Improved** Push service for SMS now also supports sent SMS - **Improved** Optimizations for mobile radio in the diagnosis - **Improved** Better stability and interoperability - **Fixed** Start of the diagnosis sometimes leads to the reconnect of the mobile connection - **Fixed** After the mobile connection was broken, there was sometimes no automatic attempt to re-establish the connection - **Fixed** In certain constellations, frequent disconnection of the Internet connection ## Internet: - **Improved** Assignment to devices added to the access profile settings in the parental controls - **Improved** Device status (active/not active) is displayed in the selection of devices for port sharing - **Improved** Clearer display of port sharing overview on mobile devices - **Improved** Independent port sharing settings for a device are now permitted when the request was made over IPv6 for the IPv4 address of the device - and vice versa - **Improved** Event message when port 80 temporarily released for sharing in order to issue certificate for letsencrypt.org - **Improved** DNS over TLS (DoT) more robust - **Fixed** Formatting errors occured in the configuration of IPv6 routes - **Fixed** Display corrected in the port sharing overview - **Fixed** After activating DNS over TLS (DoT) and longer run times, certain websites could no longer be resolved - **Fixed** After update of FRITZ!OS 7.03 or older, the IP address was not refreshed on MyFRITZ!Net (DynDNS) - **Fixed** Repeated dropping and reestablishment of VPN connections after automatic disconnection - **Fixed** IPv6: After the home network prefix was refreshed, invalid IPv6 addresses for guest access were not deleted - **Fixed** Changes to access profiles were sometimes rejected groundlessly with the error message "The list of blocked network applications with this ID already exists." - **Fixed** "PTR" type DNS queries were not always resolved correctly - **Fixed** IPv6: In IPv6 route advertisement (RA) with option 25 (Recursive DNS Server), sometimes bits from the "Reserved" field were set - **Fixed** After restoring factory settings, the first VPN connection configured no longer worked - **Fixed** After importing a configuration with an alternative LAN IPv4 network, the local DNS server remained in the old network after settings were adopted - **Fixed** The TR-064 parameter WANAccess was sometimes incorrect ("granted") when no WAN was available upon restart - **Fixed** "PTR" type DNS resolutions were not always possible - **Fixed** Sending of advanced support data did not trigger a push mail - **Fixed** When a saved configuration was adopted selectively, not all of the push mails originally configured were adopted - **Fixed** VPN connections via L2TP (e.g. in Windows 10) were unexpectedly slow - **Fixed** Device block had no effect in certain scenarios (international/engl. only) - **Fixed** In factory settings the first VPN connection could not be enabled for a single instance ## Telephony: - **Improved** Completely reworked settings pages for call diversion and call blocks - **Improved** First Configuration wizard offers configuration of a telephone - **Improved** Call diversions offer option to divert selected calls to a certain telephone on the FRITZ!Box - **Improved** Setting for using internal fax machine added to "Send faxes only" - **Improved** The "Email" and "RSS" tabs are hidden in the "Telephony / Telephony Devices" menu when DECT is switched off - **Improved** Display and management of entries in telephone books completely reworked (among others, photo visible in overview, columns can be selected for display, and selection of multiple entries added as well as copying and moving entries between telephone books) - **Improved** Settings for sending and receiving faxes combined under "Telephony / Telephony Devices" - **Improved** After all new received fax documents in the fax log have been opened, the "Info" LED stops flashing - **Improved** Integration of multiple CardDAV telephone books supported - **Improved** Better compatibility of the FRITZ!Box's SIP registrar to the SIP client LinPhone - **Improved** Better compatibility to telephone providers Easybell and VoIPfoneUK - **Improved** Enhanced compatibility for encrypted telephony - **Improved** For country setting "Germany" and telephone number configured automatically by provider, the area code included in the number is detected automatically and adopted in the line settings - **Improved** Voice quality better for telephone calls - **Improved** Forwarding of calls accepted on Snom IP telephones supported without query - **Improved** Better interoperability for CardDAV-based online telephone contacts - **Change** Adjustment to the changed behavior of the T-Net-Box when calls are rejected, for instance due to call blocks - **Change** Necessary adaptation to changed demands for authentication with Google (Google telephone book and calendar) - **Change** Necessary change for use of a Google online telephone book in the future - **Fixed** Web address of the CardDAV server could not be changed in online telephone books after entry - **Fixed** Deutsche Telekom SIP trunking account could not be disabled - **Fixed** In integrated iCloud contacts (Apple), first and last names were sometimes displayed in inconsistent order - **Fixed** During synchronization of entries in online contacts (CardDAV), in certain constellations all email addresses were deleted - **Fixed** Certain telephone numbers were temporarily not registered (among them Sipgate, EnviaTel, Teledate) - **Fixed** Connections dropped after about 30 seconds for telephony connections secured by TLSonly (among others, KPN) - **Fixed** In certain constellations, only one-way voice transmission was possible during telephony via IPv6 - **Fixed** Unsuitable presettings for telephony provider Vodafone Italy - **Fixed** Registration of telephone numbers was not possible with telephony profile for provider Vodafone Italia - **Fixed** Sporadic errors when faxing via T.38 connections - **Fixed** No hold announcement after resetting to factory settings - **Fixed** Pickup on IP telephones was possible for no longer than 4 seconds - **Fixed** After a fax was sent, the name of a recipient selected via the telephone book was not displayed in the call list - **Fixed** Editing of door intercom stations sometimes led to loss of email notification for door intercom stations - **Fixed** After importing answering machine settings including saved messages into another FRITZ!Box model, sometimes the imported messages could no longer be played back - **Fixed** Ring sequences incorrect for the country setting "Australia" - **Fixed** Sporadic loss of schedule settings for the answering machine after updating FRITZ!OS ## Wireless: - **Improved** Reworked "Wi-Fi / Wi-Fi Channel" page - **Improved** Improved auto channel function after detection of interference sources (5-GHz band) - **Improved** Improved messages on Wi-Fi under "System / Event Log" - **Improved** Detection of multiple parallel WPS activations improved - **Improved** New message under "System / Event Log" when the maximum number of wireless repeaters is exceeded - **Improved** Naming of Wi-Fi guest access (SSID, preassigned) depends on selected language - **Fixed** Vulnerabilities in the processing of incoming fragmented frames and aggregated MPDUs (A-MPDU) fixed ("Fragatttack") - **Fixed** Erroneous display of bandwidth in connections with HUAWEI P30 corrected - **Fixed** After a FRITZ!OS update, the "Wi-Fi / Wi-Fi Channel" page did not show any Wi-Fi channels, and in some circumstances, no Wi-Fi networks in the environment - **Fixed** Activation of WPS immediately after the Mesh Master was started frequently led to non-DBDC uplinks to Mesh Repeaters - **Fixed** Incorrect message under "System / Event Log" for WPS during DFS wait time ## Mesh: - **Fixed** For a FRITZ!Box configured as Mesh Master, but not as router (DHCP server), name and IP address of the router could not be changed - **Fixed** Display of Wi-Fi channel bandwidth in the user interface on the Mesh Master was sometimes different on the Mesh Repeater ## Home Network: - **Improved** Faster display of network connections in very large networks - **Improved** When leaving the device details a message concerning changed device names is displayed only if the name was actually changed - **Change** When an individual name is set for the FRITZ!Box, the name of the working group for home network sharing ("USB/Storage") remains unchanged - **Fixed** The section for blocking devices was displayed in the device details of guest devices even though this function is reserved for home network devices - **Fixed** Changed IP settings of the FRITZ!Box were not offered for printing - **Fixed** Time synchronization (NTP) was instable in certain scenarios ## SmartHome: - **Improved** Template for fast changes to color settings and brightness on FRITZ!DECT 500 ## USB: - **Improved** In fritz.nas, multiple files can be selected using the shift key - **Fixed** Home network sharing of a network drive (SMB) was not visible under Network in Windows Explorer - **Fixed** Data transmission via network drive function (SMB) failed with the Windows error message "STATUS_NO_MEMORY" - **Fixed** No network drive connection (SMB) was possible with macOS Big Sur Version 11.3 ## System: - **Improved** Configuration wizard can be interrupted and resumed - **Improved** Various usability improvements in the First Configuration wizard - **Improved** Status overview page within the first configuration - **Improved** Security query when leaving a page without saving changed settings - **Improved** Saving and restoring settings now includes telephony data from the internal storage of the FRITZ!Box (ring tones, telephone book pictures, voice messages) - **Improved** After support data have been sent to AVM, a second dispatch can be started immediately without any wait time - **Improved** A password can be made visible during entry (eye icon) in the user interface - **Improved** Corrected details in the "Diagnostics / Function" for Mesh and USB - **Change** Offer to switch to "Level III: Notify me about new versions of FRITZ!OS and install new versions automatically (recommended)" is now offered after updating only when "Level II: Notify me about new versions of FRITZ!OS and install necessary updates automatically" was previously configured - **Change** The option to log in to a FRITZ!Box (user interface) without a password, which was not recommended, is no longer supported *1 - **Change** If "only with the FRITZ!Box password" was set up for logging in to the user interface, a FRITZ!Box user with the name "fritz" and a random four-digit number together with the FRITZ!Box password will be created automatically. To log in to the user interface in the home network, entering the FRITZ!Box password is still sufficient. *2 - **Fixed** FRITZ!Box users could not be sorted in the overview - **Fixed** Access profiles with blocked applications in parental controls were not available when settings were restored - **Fixed** Number of messages in "System / Event Log" was too restricted in some areas - **Fixed** Display of installation date for the last update was incorrect in certain scenarios *1. The home network login mode without a password, which is not recommended, is no longer supported. For the initial access to the user interface after the FRITZ!OS update, the user needs to assign a FRITZ!Box password (additional confirmation required) *2. Automatic generation of a user according to the naming structure fritz and a random four-digit number if login before the update took place only with the FRITZ!Box password. Important information for developers of apps that would like to register with FRITZ!Box can be found at avm.de/service/schnittstellen ------------------------------------------------------------ # New Features in FRITZ!OS 7.20 ## Internet: - **NEW** Device block makes it easy for internet access to be switched on and off for individual devices in the parental controls - **NEW** When parental controls are enabled, settings and ticket entry are displayed when the user interface (fritz.box) is opened - **NEW** Support for encrypted resolution from domain names to IP addresses (DNS over TLS) ## Wi-Fi: - **NEW** Encryption according to the new WPA3 standard (including Wi-Fi Guest Access, connections to Mesh Repeaters and internet access via Wi-Fi with SAE) - **NEW** An open Wi-Fi network can be offered at the Wi-Fi guest access, in which only data are transmitted in encrypted form (Enhanced Open/Opportunistic Wireless Encryption, OWE) ## Mesh: - **NEW** Performance Mesh Steering improves Wi-Fi connections for terminal devices that are used from on the go - **NEW** Mesh auto-channel: Accounts for the Wi-Fi environment of the Mesh Repeater in selecting the best Wi-Fi channel for the entire Mesh ## Telephony: - **NEW** Support for online contacts from Apple (iCloud), Telekom Mail, and CardDAV providers - **NEW** Support for encrypted telephony (TLS and SRTP) for Deutsche Telekom, Easybell and dus.net ## DECT/FRITZ!Fon: - **NEW** Nine new ring tones to choose from - **NEW** FRITZ!Fon: Smart telephone book displays matching suggestions even during number entry - **NEW** Sound settings for playing back web radio stations and to improve the speech quality of telephone calls - **NEW** Start screen to display the temperature of a compatible Smart Home device in the home network (for instance, FRITZ!DECT 200, FRITZ!DECT 30x, FRITZ!DECT 440) ## Home Nework: - **NEW** Network devices with blocked internet access are marked in the entire user interface - **NEW** Network passwords for the powerline network can be changed on FRITZ!Powerline connected directly (via LAN) ## Smart Home: - **NEW** Reworked Smart Home pages on the FRITZ!Box user interface - **NEW** Supports the FRITZ!DECT 500 LED light - **NEW** Supports the four-button switch FRITZ!DECT 440 - **NEW** Supports the DECT ULE/HAN FUN roller blinds profile - **NEW** Display of total consumption (kWh) of the past two years for the smart plugs FRITZ!DECT 200 and 210 - **NEW** Synchronization of the temperature setting, the boost mode and open window detection within a group of radiator controls - **NEW** The "Adaptive Heating" feature of the FRITZ!DECT 301 makes the configured temperature available at the desired time ## USB: - **NEW** The SMBv3/v2 protocol of the Windows network drive function is supported by default; optionally, SMBv1 can still be supported ## System: - **NEW** Users supported in becoming acquainted with FRITZ!Box functions with welcome page - **NEW** Time period for automatic updates can be defined ------------------------------------------------------------ # New Features and additional Improvements in FRITZ!OS 07.21 ## Mobile Network: - **NEW** Support for configuration and use of a second PDN/APN for telephony (VoIP) - **Improved** Angabe der Bandbreite bei UMTS/HSPA Verbindungen optimiert - **Fixed** Dedicated bearer was disregarded or not correctly regarded in VoIP upstream (IP address and mask of TFT filter were ignored) - **Fixed** Undesired signalization of combined EPS/IMSI Attack when LTE-only is configured ## Internet: - **Improved** Improved stability for name resolution in the internet (DNS), especially in the case of sudden connection losses by the remote site - **Improved** Improved stability for encrypted name resolution in the internet (DNS over TLS, DoT) - **Improved** Optimierte Auflösung von PTR-Queries im DNS - **Improved** VPN interoperability improved on DS Lite/CG NAT connections - **Improved** Optimization of error handling (retransmit) for incorrect DNS responses to DNS over TLS (DoT) - **Improved** Email notification about successful update was not sent to the MyFRITZ! email address (myfritz.net) - **Fixed** Device could not be reached in the home network under the device name (host name); device name now replaced by DNS name - **Fixed** Servers for encrypted name resolution in the internet (DNS over TLS, DoT) that were shut down in case of error were not always reactivated - **Fixed** During configuration of a VPN tunnel for selected LAN ports of the FRITZ!Box no internet connection for devices connected to these ports - **Fixed** Unexpected restriction on reaching certain websites when blacklist enabled - **Fixed** Display problems in the port sharing overview - **Fixed** During configuration of MyFRITZ! internet access no NAS rights were granted for already existing users - **Fixed** On a FRITZ!Box configured as an IP client, it was not possible to reset additional protection for MyFRITZ! (myfritz.net) - **Fixed** Remote access via HTTPS/MyFRITZ! led to occasional interruptions due to invalid session - **Fixed** After reboot it was not possible to reset additional protection for MyFRITZ! (myfritz.net) - **Fixed** Inconsistencies in display of times blocked by parental controls eliminated - **Fixed** Incorrect warning about diverted or multiply opened ports - **Fixed** VPN connection to a FRITZ!Box with older version of FRITZ!OS was not always possible - **Fixed** VPN connection of a downstream FRITZ!Box failed in ATA mode - **Fixed** "Blocked" icon for parental controls was displayed erroneously when certain settings were configured for the "Guest" profile - **Fixed** After rebooting, all prioritization rules for a network application were deleted except the first prioritization rule - **Fixed** No internet access possible when a VPN connection used with a smartphone - **Fixed** Gerät am WLAN-Gastzugang des Repeaters wurde unter Umständen keine IP-Adresse über DHCP zugewiesen - **Fixed** After import of a VPN configuration, the changed configuration was not enabled - **Fixed** In certain operation modes, the Online Monitor showed no upload traffic - **Fixed** VPN problems in special scenarios - **Fixed** Settings page for privider services was not displayed ## Telephony: - **Improved** Minor adjustments for various telephony provider profiles in Italy and the Netherlands - **Improved** Labeling of multiple/overlapping use of telephone numbers by the internal answering machine standardized - **Improved** Details improved in the telephony provider profiles for EW and Plusnet - **Improved** Corrected details for the new transfer function with IP telephones - **Improved** Various details corrected for telephony provider profiles for Germany, Austria, Switzerland, Italy and the Netherlands, and additional provider profiles added - **Improved** Stability - **Change** CardDAV provider "MagentaCloud" renamed to "TelekomMail" - **Fixed** When creating new telephone numbers, the first area code entered was not applied to the interference resistance settings - **Fixed** Area codes starting with 01 or 1 were not accepted (for instance, 01 for Vienna with the Austrian country code) - **Fixed** Incorrect display of area code when editing the SIP trunks of certain providers (e.g., Easybell) - **Fixed** When creating and editing telephone numbers under "Other provider", the password was requested - **Fixed** Incorrect rendering of regional prefix in the editing view - **Fixed** On the Start page, most of the telephone numbers of a SIP trunk were displayed as not registered - **Fixed** Wrong default settings for music on hold after loading the factory settings - **Fixed** ?Telekom SIP Trunk? - erroneous display when editing the telephone numbers later - **Fixed** Corrections for the telephony provider profiles "Vodafone zuhause" and "A1 SIP-Trunk" - **Fixed** If telephone numbers of certain providers not included in the provider list were automatically configured, the "Overview" page was empty - **Fixed** When editing a telephone number it was not possible to switch to the free settings mask "Other Provider" - **Fixed** Wrong telephony profiles for Post Luxemburg and Telenor ## DECT/FRITZ!Fon: - **Improved** Pictures can also be browsed with up/down rocker ## Wi-Fi: - **Improved** Optimized performance - **Improved** Better stability - **Improved** New information presented when "WPA2 + WPA3" encryption selected on the "Wi-Fi / Security" page - **Change** Base stations with hidden SSID cannot be displayed - **Fixed** Under "Wi-Fi / Wi-Fi Network / [wireless device] / Properties", the "Wi-Fi property (2.4-GHz)" was shown twice for wireless repeaters - **Fixed** Settings for Wi-Fi schedule could not be changed - **Fixed** Error while setting the Wi-Fi channel whenever radar was detected during the channel switch (5-GHz band) - **Fixed** Problems with activation of the Wi-Fi guest access ## Mesh: - **Improved** Better stability - **Fixed** The combination of Wi-Fi settings "Mixed Mode" and "PMF" was not applied correctly in the Mesh - **Fixed** Data rates of FRITZ!Repeaters' LAN connections were not displayed ## Smart Home: - **Fixed** Smart Home Vorlagen could not be edited - **Fixed** Message for battery warning missing in the device manager - **Fixed** Numerical consumption values missing for the "1 Week" period ## Home Network: - **Fixed** Graphics error for certain options in the device details ## USB: - **Improved** USB performance improved via Windows network drive function (SMB) - **Fixed** Network drive function (SMB) for overwriting files on "fritz.nas" in Windows 10 started only with a long delay - **Fixed** For search results on http://fritz.nas no HTML5 player was started when a file was supposed to be played back - **Fixed** In some constellations it was not possible to connect to online memory ## System: - **Improved** Improved evaluation of Wi-Fi connection in "Diagnostics / Function" - **Improved** Rendering of blocked devices in the user interface completed - **Improved** Corrected details in the user interface - **Improved** Better stability - **Fixed** Incorrect display of dispatch ID for support data - **Fixed** Missing display of evaluation for password assignment - **Fixed** After set to IP client mode, a fixed IP address was always configured - **Fixed** Empty page in the statistics of the "Online Monitor" if langage was set to "Italian" - **Fixed** Incorrect display of the "Password" field under "System / Backup" - **Fixed** Import-Versuch einer Konfigurationsdatei, die mit Labor-Firmware erzeugt wurde, scheitert unter Umständen - **Fixed** Incorrect connection status for repeaters shown under "Diagnostics / Function" on the Mesh Master - **Fixed** Deletion of app rights was not successful [defect 76556] - **Fixed** Error when exiting the First Configuration wizard - **Fixed** Fax sending triggered a delivery error for push service, although push service was not enabled - **Fixed** When maximum number of users reached, an empty page was displayed when the settings were opened under "System / FRITZ!Box Users" - **Fixed** Incomplete test for minimum password security - **Fixed** Remedies a problem that caused the "Overview" and "Telephony" pages in the FRITZ!Box user interface to remain blank --- Initial FRITZ!OS Version --- FRITZ!OS 7.20 ------------------------------------------------------------- ##Information on the Mesh Feature ------------------------------------------------------------- General information on Mesh is presented at en.avm.de/mesh-networking. ------------------------------------------------------------- **Enabling the Mesh Function** To check whether a FRITZ! product is enabled for Mesh, see the "Mesh Overview" of the FRITZ!Box (the Mesh Master) under "Home Network / Mesh". Here the products in the Mesh are designated with a corresponding "Mesh active" icon. A FRITZ!Repeater or FRITZ!Powerline adapter with FRITZ!OS 6.90 or higher installed can be enabled for Mesh in various ways: - If the product has the factory settings configured and is being connected with the FRITZ!Box for the first time, it will be automatically enabled for Mesh. - If the product is already connected, but not enabled for Mesh, it is added to the Mesh by pressing a button on the product to be integrated and a button on the FRITZ!Box. On the FRITZ!Box, use the button that initiates WPS (depending on the model, press the "Connect" or "WPS" button briefly, or the "WLAN/WPS" button for 6 seconds). Detailed instructions, additional information and the answers to frequently asked questions about Mesh are presented at en.avm.de/mesh-faq. ------------------------------------------------------------- ****Mesh for Telephony and Smart Home**** With FRITZ!OS 7.0, telephony and Smart Home are also compatible with the Mesh. The connections of cordless telephones and Smart Home products are displayed in the FRITZ!Box Mesh Overview. You can use a second FRITZ!Box as Mesh Repeater, and use telephones registered with the second FRITZ!Box with the numbers assigned in the first FRITZ!Box, the "Mesh Master". ------------------------------------------------------------- **Configuring a Second FRITZ!Box as a Mesh Repeater with the Press of a Button** Prerequisites: - Your existing FRITZ!Box supports Mesh (FRITZ!OS 6.90 or higher). - The FRITZ!Box to be deployed as a Mesh Repeater has been updated to FRITZ!OS 7.0 and you have restored its factory settings. Here's how: - Connect the port "LAN 1" of the Mesh Repeater with the Master using a LAN cable. - Initiate the Connect function on both boxes (7590: press the "Connect" button briefly; 7490: press and hold down the "WLAN/WPS" button for 6 seconds). After the connection procedure is concluded, the second FRITZ!Box is ready for operation as a Mesh Repeater. (It is operating in "IP client" mode and, as a Mesh Repeater, adopts the wireless LAN settings and other important settings from the FRITZ!Box). Please note that this function can be used only if the second FRITZ!Box is permanently connected with the first box by LAN cable. If you received the second FRITZ!Box from your internet provider, the automatic configuration of this feature might not be possible. In this case, configure this FRITZ!Box manually in the user interface as Mesh Repeater. For instructions, see en.avm.de/mesh-faq. ------------------------------------------------------------ **Transmitting the Telephone Numbers of a Mesh Master to Another FRITZ!Box in the Home Network** Once you have added an additional FRITZ!Box to the Mesh, you can configure it so that all telephone numbers are available on each FRITZ!Box. If your FRITZ!Box is connected with a landline, you can use the telephones connected to the second FRITZ!Box to make calls over the internet as well as on the landline. If the latest FRITZ!OS 7.0 is installed on both FRITZ!Boxes, the telephone numbers are transferred automatically in the Mesh once the "Telephony in the Mesh" option is enabled. If the new FRITZ!Box is already a component of the Mesh, or if you have already set up telephone numbers on it, these telephone numbers must be deleted and one of the two FRITZ!Boxes must be restarted. Then the new FRITZ!Box must be enabled for "Telephony in the Mesh". To do so proceed as follows: - Click "Home Network" in the user interface of the Mesh Master. - Click "Mesh" in the "Home Network" menu. - Click the "Mesh Settings" tab. - In the "Use Telephony in the Mesh" section, click the "Enable" link next to the respective Mesh Repeater and then confirm that the procedure may be executed on the Mesh Master as well, if asked to do so. The telephone numbers are now distributed in the Mesh and can be assigned to your telephones and other terminal equipment for telephony (for instance, answering machines) on the FRITZ!Box. Note: Telephony Mesh is not the same thing as DECT repeating, which requires the support of special hardware on the FRITZ!Box deployed as the Mesh Master. If you would like to use DECT repeating, you can purchase the FRITZ!DECT Repeater 100 from an electronics retailer. ___________________________________________________________ Instructions for installing the update: Use the update function offered in the user interface to install the update. This automatically offers you the right FRITZ!OS. Click "Wizards", select "Update" and then follow the instructions on the screen. ___________________________________________________________ © AVM GmbH 2004 - 2024. All rights reserved. This AVM firmware package contains files that are propagated under different licenses, in particular under a license held by AVM or under an open-source license (namely the GNU General Public License, GNU Lesser General Public License or FreeBSD License). For details on the various licenses, see the "license.txt" file (https://download.avm.de/fritzbox/license.txt). The source code of the files propagated as open source files can be obtained upon a written request to fritzbox_info@avm.de. AVM grants the non-exclusive right to use this AVM firmware package, which is supplied exclusively in object code format. The licensee may create only one copy of the software, which may be used exclusively for backup use. Without previous approval in writing, and except for in cases permitted by law, it is particularly prohibited to -copy, propagate or in an other manner make the AVM firmware package publicly accessible, or- process, disassemble, reverse engineer, translate, decompile or in any other manner open the software and subsequently copy, propagate or make the firmware publicly accessible. TVI 2024/03/19